SOYO LI-7000 User Manual page 71

Motherboard's BIOS Setup Utility
4-5.6 Onboard Parallel Ports
Onboard Parallel
Ports
Onboard Parallel
Port
Parallel Port Mode
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
4-5.7 Others Optional
PWRON After
PWR-Fail
Game Port Address
Setting Description
Disabled Choose the printer I/O
address.
378/IRQ7
3BC/IRQ7
278/IRQ5
SPP The mode depends on your
external device that
EPP
connects to this port.
ECP
ECP+EPP
3 Choose DMA3
1 Choose DMA1
EPP 1.9 Select EPP port type 1.9
EPP 1.7 Select EPP port type 1.7
Setting Description
On The system will switch on
when power comes back
after a power failure.
Off The system will remain off
when power comes back
after a power failure.
Former-Sts The system will return to
the state it was in before the
power failure when power
returns. (i.e: If the system
was on, it will switch on
again, if it was off, it will
remain off)
Disabled Set the I/O base address for
the ON board game port
201
under this item.
209
67
LI-7000
Note
Default
Default
Default
Default
Note
Default
Default