Motherboard's Hardware Installation
2.
Power Button & Front Panel LED: JP15
HDD LED
SVS LED #
ACPI LED
(1). IDE LED
Attach the 2-pin IDE device LED cable to the corresponding IDE LED
header on the Motherboard. This will cause the LED to lighten when an
IDE (HDD, CD-ROM) device is active.
(2). ACPI LED
Connecting the 2-pin ACPI LED cable to the corresponding ACPI LED
header will cause the LED to light whenever the system is in ACPI mode.
The manufacturer has permanently set this Motherboard in ACPI mode
due to most hardware and software compliance to ACPI mode.
10
IDEACT#
8
6
NC
IOSVSB
4
2
VCC
HDD LED Pin Assignment
Pin9 Pin10
VCC
ACPI LED Pin Assignment
Pin4 Pin6 Pin8
IO SVSB
VCC
9
PWRBTN#LPC
7
5
5VSB
3
NC
LED 0
1
IDEACT#
None
SVS LED#
30
LI-7000
Power Button
LAN LED