Multitech MultiModem II MT5600BA-V92 User Manual page 36

Command: #CBNy=[-]x
Values: y = 01–30
x = dialing string
Default: None
Description: Stores the callback dialing string x in memory location y. The dialing string can include
the digits 0 through 9 and any of the following characters: #, *, comma (,), semicolon
(;), W, A, B, C, and D. Up to 30 characters can be used.
Example:
AT#CBN01=9,16127853000. If the optional - character precedes the dialing string, and
the caller appends the same character to the password, the caller is connected
immediately, and the hangup and callback are skipped.
Command: #CBPy=x
Values: y = 01–30
x = password (6–10 characters)
Defaults: None
Description: Stores callback security password x in memory location y. The password must have 6
to 10 characters.
Note:
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Store Callback Number
Store Callback Password
A direct connect password may not end with a hyphen (-).
Chapter 6 – Callback Security
36