Section 4: Operations; Operation Safety; Dust Drawers; Operation - Grizzly G0631 Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
A
occur if this machine is
used to collect paint fumes
or overspray! Do not use
downdraft table as a paint
spray bench.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-16-
fire/explosion could

Dust Drawers

Frequently monitor and empty the dust drawers of
accumulated sawdust (Figure 13).
Figure 13. Dust drawer (one shown).

Operation

To use the Model G0631:
1.
Place the panels in the upright position
and latch them in place; or fold them down
when sanding larger workpieces that extend
beyond the table.
2.
Place the workpiece on the rubber support
grommets as you sand your workpiece as
shown in Figure 14.
Figure 14. Typical sanding operation set up.
G0631 79" x 28" Downdraft Table