Sco Unixware Installation - Asus P2B-D User Manual

7

SCO UnixWare Installation

This chapter explains how to install the Adaptec 7800 Family
Managers Set Driver adsl20 or adsl (UltraSCSI) and adsb20 or adsb
(Ultra2 SCSI) for SCO UnixWare—SCO UnixWare 2.0x and SCO
UnixWare 2.1.
adsl20 and adsb20 drivers (or packages) are used with SCO
UnixWare 2.0x. The adsl and adsb drivers (or packages) are used
with SCO UnixWare 2.1. The adsl and adsl20 support Ultra SCSI
and earlier Adaptec 7800 host adapters. The adsb and adsb20
drivers support Ultra2 Adaptec 7800 host adapters. Refer to the
Adaptec 7800 Family host adapters on page 1-3.
If you are performing a first time SCO UnixWare installation, see
Installing the Driver When Installing SCO UnixWare on page 7-2 to
begin driver installation. If SCO UnixWare is already installed in
your system, see Installing the Driver When SCO UnixWare is Already
Installed on page 7-3.
7-1