5. Motherboard Driver Installation
6. SCO UnixWare Server
I. LSI SCSI Driver Installation
A. Building the SCO UnixWare C8XX BTLD Diskette
To create a C8XX BTLD diskette to use with UnixWare 2.1.X or UnixWare 7, copy
the raw dd image file onto a 1.44 Mbytes floppy diskette. This process is dependent
upon the operating system that you are using to create this diskette. See the instruc-
tions below for UNIX System and DOS System Users. After the driver diskette been
created, labeled as "PCI SCSI SCO UnixWare driver".
For UNIX System Users:
Follow these steps to create the BTLD diskette:
1. Insert a 3.5" diskette into the floppy diskette drive.
2. At the UNIX prompt, type: [dd if=/<path>/unixware.dd of=/dev/rfd0]. The
<path> is where the dd image is located. For UnixWare 2.1.X, the dd image
file is located here:
/SDMS/DRIVERS/UNIXES/UNIXWARE/UW21X/UNIXWARE.DD
For UnixWare 7, the dd image file is located here:
/SDMS/DRIVERS/UNIXES/UNIXWARE/UW7/UNIXWARE.DD
For DOS System Users:
Under this section, DOS system users have two choices.
1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy dis-
kette. For UnixWare 2.1.X, this dd image is located at:
\SDMS\DRIVERS\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD
For UnixWare 7, this dd image is located at:
\SDMS\DRIVERS\UNIXES\UNIXWARE\UW7\UNIXWARE.DD
RAWRITE3.COM, which is a public domain utility, is available on this CD-
ROM at this location:
\SDMS\DRIVERS\UNIXES\RAWRITE3.COM
Instructions for using this utility are included in its accompanying RaWrite file
or as a Microsoft Word document located at:
\SDMS\DRIVERS\UNIXES\RAWRITE3.DOC
2. The other DOS alternative is to use the self-extracting image file appropriate
for your version of UnixWare. These are located under:
\SDMS\DISKIMAG\UW21X.EXE (-or-) \SDMS\DISKIMAG\UW7.EXE
ASUS CUR-DLS User's Manual
95