Part Identification Chart - Pro-Form XP 210 U User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-888-533-1333.
M4 x 16mm
M4 x 22mm
M8 x 25mm Button M8 x 60mm Button
Screw (40)––6
Screw (54)––2
Screw (44)––6 Screw (43)––4
M8 Curved
M10 x 80mm Button M8 Split Washer
Screw (36)––2 (45)––4
Washer (57)––2
5