Data And Fax Calls - Nokia 2865 User Manual

S e t t i n g s
Select a calling card
You can select one of the calling cards for which you have saved information.
The selected card information is used when you make a card call.
1. Select Menu > Settings
2. Enter your security code, and select OK. See "Security," p. 86.
3. Select the calling card of your choice.
Make card calls
After you have selected a calling card, make a card call.
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.

Data and fax calls

Data and fax calling is a network service. See "Network services," p. 7. If your network
operator supports this feature, you can set up the device to send or receive data
and fax calls when connected to a device such as a PDA or PC.
Receive data or fax calls
For better performance during data or fax calls, place the device on a stationary
surface. Do not move the device or hold it in your hand during a data call.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
See "Network services," p. 7, for more information.
74
> Call > Calling card.
Card call is displayed.