Interval Timer - Nokia 2865 User Manual

and the timer (in hh:mm:ss format) appear in the standby mode when the
countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights.
If you are in standby mode, select
press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select
end key to clear the timer note.
To change the time:
1. Select Menu >
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
To stop the timer before the alarm sounds, select
Stop timer.

Interval timer

The interval timer in your device allows you to store multiple interval timers. You can
define and store up to 10 timing periods for each interval timer. Once at least one
interval timer is set and stored, you can select the interval timer and one of the stored
intervals for that timer. When the selected interval expires, your phone sounds an
alarm, vibrates, and flashes its lights.
To set an interval timer, do the following:
1. Select Menu >
2. Select Add new
an interval timer.
3. Enter a name for the timer, and select Save.
4. Enter a name for the first timer period, and select Save.
Restart
Organizer > Timer
Organizer > Timer >
timer. This option only appears if you have already created
or Exit. If you are not in the standby mode,
> Change time.
Menu >
Interval timer.
O r g a n i z e r
Exit or press the
Organizer > Timer >
103