Data & Fax Calls - Nokia 2180 Owner's Manual

All manuals and user guides at all-guides.com
11. Data & Fax Calls
Your phone can send or receive data when it’s connected
to a compatible data terminal (such as a PC) through a
data adapter (such as a PC card) and a compatible cellular
cable.
You can also send and receive faxes when your phone is
connected to a data terminal with fax capability through a
data adapter and a compatible cellular cable.
Note: Before sending or receiving a data or fax call, you
should select $QDORJ mode in Dual Mode Selection
(Menu 6 1) for your phone.
Check that the data terminal is properly installed. See the
documentation for the data adapter and terminal.
You cannot make a data or fax call while you have a call
already in progress.
Note: Be sure to make backup copies of important data
before initiating a fax or data call.
To start an outgoing data or fax call
1) A data or fax transmission is always started from the
data terminal
2) Start the transmission from the data terminal as you
normally would. Your phone calls the number you
entered into the display terminal.
3) After the data or fax transmission, the call should end
automatically, or you can press
To receive a data or fax call
í
1) Press to answer the call. Or, if you know that the
incoming call is a data or fax call, you can answer the
call from the data terminal.
2) After receiving the data or fax, the call should end
automatically, or you can press
ô
on your phone
ô
on your phone
57