Control Queue - Axis Q6034-E User Manual

Ptz dome network camera

Table of Contents

Enable proportional speed - When using a joystick (or emulating one with the mouse), this setting can be used to reduce the

maximum pan/tilt movement speed, i.e. the speed the camera moves at when the joystick is pushed all the way out in any

pan/tilt direction. This is useful when the camera is zoomed in on an object and a pan/tilt movement is performed.

See the online help

for more information.

Controls

Panel Shortcut Command Buttons can be configured to provide direct access to commands issued via

the VAPIX® Application Programming Interface. The buttons will be displayed in the PTZ control panel,

which is available on the Live View page by clicking the Ctrl panel button.

Enable/Disable controls - – Uncheck the boxes to disable the pan, tilt, zoom, focus and iris controls.

Note:

Disabling PTZ controls will affect preset positions. For example, if the tilt control is disabled, the camera cannot move

to preset positions that require a tilt movement.

Control Queue

The administrator can set up a queue for the PTZ controllers. Once set up, the PTZ Control Queue buttons appear on the Live

View page offering one viewer exclusive control for a limited amount of time. Other users will be placed in queue.

AXIS Q6034-E - PTZ (Pan Tilt Zoom)

Table of Contents