Camera Settings - Axis Q6034-E User Manual

Stream Profiles
There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new, customized
profiles can be created. Each profile has a descriptive name, describing its usage and/or purpose. The profiles can be accessed
from the Live View page.
• To create a new stream profile, click Add to bring up the Stream Profile Settings dialog.
1. Enter a unique name and a description for your profile.
2. Select a Video encoding type (H.264 or MJPEG) from the drop-down list.
3. Modify the stream settings under the Image, H.264 and MJPEG tabs. See
4. Click OK to save the profile.
To copy an existing stream profile, click Copy and enter a new name. Change the stream profile settings as above.
•
• To modify an existing stream profile, click Modify and change the settings as above. The original settings for the
pre-programmed profiles can always be restored by clicking Restore.
To remove a stream profile, click Remove. Pre-programmed profiles cannot be removed.
•

Camera Settings

This page provides access to the image settings for the network camera.
Image Appearance
Color level - Select an appropriate level by entering a value in the range 0-100. Lower values mean less color saturation,
whilst the value 100 gives maximum color saturation.
Brightness - The image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.
Sharpness - Controls the amount of sharpening applied to the image. A sharper image might increase image noise, especially
in low light conditions. A lower setting reduces image noise, but the image would be less sharp.
White balance
White balance is used to compensate for the different colors present in different light sources, to make the colors in the image
appear the same. The network camera can be set to automatically identify the light source and compensate for its color.
Alternatively, the type of light source can be manually selected from the drop-down list. Please see the online help
files for a description of each available setting.
Wide dynamic range - Wide dynamic range can improve the exposure when there is considerable contrast between light and
dark areas in the image.
Exposure Settings
Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwith
considerations.
Exposure control - This setting is used to adapt to the amount or type of light used. Automatic is the default setting and
can be used in most situations. The shutter speed is automatically set to produce optimum image quality.
Max exposure time - Select the maximum exposure time from the drop-down list. Increasing the exposure time will
improve image quality, but may decrease the frame rate. There may also be an increase in motion blur. Checking Allow slow
shutter decreases the shutter speed in low light to improve image brightness.
Enable Backlight compensation - Enable this option if a bright spot of light, for example a light bulb, causes other areas in
the image to appear to dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure. For most situations, the
Auto settings can be used.
IR cut filter - Set the filter to Off to allow the camera to "see" infrared light; it increases the light sensitivity, for example at
night. The image is shown in black & white when the IR cut filter is off. Set to Auto to automatically switch between On and
Video Stream,
16
AXIS Q6034-E - Video
on page 14.