Cleaning Instructions - Hoshizaki F-800MAH(-C) Service Manual

Modular flaker
Hide thumbs Also See for F-800MAH(-C):
Table of Contents

Advertisement

2. CLEANING INSTRUCTIONS

1. HOSHIZAKI recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves for safe handling of the cleaning and
sanitizing solution. This will prevent irritation in case the solution contacts
with skin.
<STEP 1>
Dilute the solutions with water as follows.
Cleaning solution: 4.8 fl. oz. of recommended cleaner Hoshizaki "Scale Away" or
Sanitizing solution: 2.5 fl. oz. of IMS-II Sanitizer or a 5.25 % sodium hypochlorite
Note: IMS-II Sanitizer, Part #SA0004, is available through your Hoshizaki Dealer.
For safety and maximum effectiveness, use the solution immediately after
dilution.
<STEP 2>
Use the cleaning solution to remove lime deposits in the water system.
1) Turn off the power supply.
2) Close the Water Supply Line Shut-off Valve.
3) Remove all ice from the Storage Bin.
4) Remove the Front Panel and the Top Panel.
5) Move the Flush Switch to the "FLUSH" position.
"LIME-A-WAY" (Economics Laboratory, Inc.) with 0.8 gal. of water.
This is a minimum amount. Make more solution, if necessary.
solution with 5 gal. of water.
Dilute the solutions with water as follows.
IMPORTANT
WARNING
54

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-800mwh-cF-800mahF-800mwh

Table of Contents