Advertisement
R6VN series D Operation Manual
Sharpening The "S" Blade
ALWAYS WEAR CUTTING GLOVES WHEN HANDLING THE
BLADES.
1. Put on your cutting gloves.
2. Use the robot coupe stone or any good sharpening stone.
3. Hold the blade flat on the edge or corner of a sturdy table.
4. With the other hand hold the stone at a 30 degree angle against the top bevel of one
blade.
5. Pull the stone into the blade edge moving from hub to tip, several strokes, until the
blade is sharp.
6. Turn the blade over and rub the stone flat against the underside of the blade to remove
the feather edge formed at step 5.
7. Repeat the procedure for the other blade.
8. Wash the blade before use.
Page 18
Advertisement
