Set Up Your Phone - Palm PRE 2 User Manual

Top view
1 Power: Press to wake up or turn off the screen. Press and hold to turn wireless services on
and off, replace the battery, or turn your device completely on and off. Turn your device
completely off before you remove the battery.
2 Ringer switch: Slide to turn the ringer and notification sounds on or off. (Red means off.)
The ringer switch does not affect music or video playback sounds.
3 3.5mm headset jack.
Bottom view
* Back cover release
16 Chapter 2 : Basics

Set up your phone

Complete setup
1 Press and hold the power button
phone until you see the Palm
®
seconds).
2 Follow the onscreen instructions to complete setup.
3 When the Palm profile screen appears, do one of the following:
• If you are a new user: Tap Create New
profile, enter a working email address, create a password for your
profile, and select and answer a security question.
IMPORTANT You must enter a valid email address to access all the features
available on your phone. Note that entering an email address here does not set up
your phone to send and receive messages from that email account; you must do
that separately (see Email).
• If you are upgrading from another webOS phone that you no longer
use: Tap Sign In To My Profile. Enter the username and password
for your existing profile. Any information backed up to your profile is
restored to your new phone (see
NOTE You can't use the same profile on two webOS phones at the same time.
4 Your phone is ready to use. To learn how to make your first call, see
Make calls.
on the upper-right corner of your
logo on the screen (approximately five
Profile. To create a Palm
What information is backed up?).