Set Up Your Phone - Palm PIXI PLUS User Manual

Set up your phone

Insert the SIM card
Your SIM (subscriber identity module) card contains information on your
wireless account. To make calls or use your phone's email or web features,
you need to insert a SIM card
If you don't have a SIM card, contact AT&T.
To take advantage of the high-speed data connection available on your
phone, you may need to have a 3G SIM card. Check with AT&T for
information.
WARNING You must remove the battery first whenever you insert or remove
the SIM card.
1 If the USB cable is attached to the phone, disconnect the USB cable.
2 If a wired headset is attached to the phone, disconnect the headset.
3 Turn the phone completely off (see
wireless services) on/off).
Turn everything (the screen and
4 To begin separating the back cover from the body of the phone, use
your thumbnail to release the clasp at the midpoint of the left side of
the phone (see (a) in step 5).
5 Run your thumbnail around the hairline opening to release the
upper-left and top clasps. You may hear a sound when the clasp
releases.
Chapter 2 : Basics 13