Palm PRE 2 User Manual page 77

Use a wired headset
Your phone works with headsets that have a 3.5mm connector (look for
three colored bands on the plug). When in doubt, ask the third-party
headset manufacturer if the product is compatible with your phone. If you
hear a headset buzz or poor microphone performance, your headset may be
incompatible with your phone.
1 Connect the headset. While on a call, the
2 The button on the headset performs different actions depending on
the headset model and what's happening on the phone. Press the
button once to perform any of the following tasks supported by your
particular headset:
• Answer an incoming call.
• Respond to call waiting.
• Hang up a single active call or all calls on a conference call.
• Switch between calls if there is one active call and one call on hold.
3 If you want to stop using the headset, do any of the following:
• To switch from the headset to your phone's speakerphone: Tap
and tap Speaker.
• To switch from the wired headset to a previously paired Bluetooth
hands-free device: Tap and tap the device name.
• To use your phone without the headset: Disconnect the headset.
Set up and use a Bluetooth hands-free device
®
Your phone is compatible with many headsets and car kits (sold separately)
enabled with Bluetooth wireless technology version 2.1, with EDR and
®
Stereo (with AVRCP media controls).
icon changes to .
®
After you set up a connection with a Bluetooth headset or hands-free car kit,
you can communicate using that device whenever it is within range and the
Bluetooth feature on your phone is turned on. The range can vary greatly,
depending on environmental factors. The maximum is about 30 feet (10
meters).
NOTE You can use a stereo (A2DP-enabled) Bluetooth headset or speakers to
listen to music files on your phone. You cannot, however, use a mono Bluetooth
headset to listen to music files.
1 Open Bluetooth .
2 If the Bluetooth setting at the top of the screen is off, tap
the Bluetooth feature from Off to On.
3 Tap Add device.
4 In Type, make sure Audio is selected.
5 Tap the device name.
6 To use a Bluetooth device with your phone, follow the instructions that
came with the Bluetooth device.
7 To switch to another Bluetooth device while on a call: Tap
the new device name. You can also tap
your phone without the headset.
TIP If you make a Bluetooth connection with a car kit, you might get a notification
on your phone asking if you want to upload contacts to the car kit. Tap
upload contacts. If you later want to delete the contacts from the car kit, check the
car kit documentation for instructions.
For more information on using the Bluetooth feature on your phone, see
Bluetooth wireless technology.
®
Off to switch
and tap
Handset or Speaker to use
Allow to
Chapter 6 : Phone 77