Rds; Setting Rds Reception Mode And Receiving Rds Stations; Receiving Rds Regional (Local) Stations; Pi Seek Setting - Alpine iDA-X001 Owner's Manual

RDS

Center Jog Dial
BAND/TA ENT
BACK
Setting RDS Reception Mode and
Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press FUNC./SETUP to activate the Function
mode.
2
Press ENT to select the AF (Alternative Frequency)
mode.
3
Turn the Center Jog Dial to select On, and press
ENT.
4
Press FUNC./SETUP to activate the RDS mode.
• When the "Setting PTY31 (Emergency Broadcast) reception" (refer
to page 10) is set to on, if the unit receives the PTY31 (Emergency
Broadcast) signal, the unit will show "ALARM" in the display
automatically.
The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
Traffic Programme
TP
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
Receiving RDS Regional (Local)
Stations
1
VIEW
FUNC./SETUP
2
3
4
5
• Pressing BACK during the procedure will return to the previous

PI SEEK Setting

1
2
3
4
5
• Pressing BACK during the procedure will return to the previous
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
Turn the Center Jog Dial to select the Tuner mode,
and then press ENT.
Bluetooth General Display
Press ENT to select Regional.
Turn the Center Jog Dial to select On or Off, and
then press ENT.
In the Off mode, the unit automatically keeps receiving the
related local RDS station.
Press and hold BACK for at least 2 seconds to
return to normal mode.
mode.
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
Turn the Center Jog Dial to select the Tuner mode,
and then press ENT.
Bluetooth General Display
Turn the Center Jog Dial to select PI Seek and then
press ENT.
Turn the Center Jog Dial to select On or Off, and
then press ENT.
Press and hold BACK for at least 2 seconds to
return to normal mode.
mode.
iPod Tuner
iPod Tuner
9
-EN