Adjusting The Monitor Height - BenQ XL2411T User Manual

Adjusting the monitor height

To extend the monitor stand to a higher position, press
the lower part of the height release on the stand while
holding the bottom of the monitor at the same time.
And pull the stand and the monitor upward together
to the desired height.
If the height release in the proceeding operation cannot be
pressed down, press the top of the monitor once as
illustrated on the right before you proceed.
If you prefer to lower the monitor stand height, push
the stand downward while holding both left and right
sides of the monitor.
Height release
How to assemble your monitor hardware 13