BenQ XL2411T User Manual page 11

4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
5. Route the cables via the cable clip.
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button
on the monitor.
Turn on the computer too, and follow the
instructions in Getting the most from your BenQ
monitor on page 18
software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
to install the monitor
How to assemble your monitor hardware 11