Memory Only Mode - Yaesu FT-1900E Operating Manual

M O
EMORY PERATION
M -O M
EMORY NLY ODE
Once memory channel programming has been completed, you may place the radio in a
"Memory Only" mode, whereby VFO and Home Channel operation are impossible. This
may be particularly useful during public-service events where a number of operators may
be using the radio for first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode, turn it off. Now press and hold in the
[ D/MR ( MW )] key while turning the radio on. The VFO and Home Channel will now be
disabled.
To return to normal operation, repeat the above power-on procedure.
The FT-1900E's scanning capability provides the operator with many convenient methods
of rapid frequency navigation.
42 FT-1900E O M