Yaesu FT-1900E Operating Manual page 15

Fm
Table of Contents

Advertisement

F
RONT
[ REV ( DW )] Key
During split-frequency operation, such as through a repeater, this key reverses the trans-
mit and receive frequencies.
Press and hold in this key for one second to activate the Dual Watch feature, described
in the Operation chapter ("PRI" will be displayed on the LCD, indicating "Priority
Channel" monitoring).
[ LOW ( A/N )] Key
Press this key momentarily to select the transmitter power output level.
The available power levels are:
LOW1 (5 W)
To toggle the display between indication of the frequency and the channel's Alpha/
Numeric label, press and hold in this key for one second while receiving on that memory
channel.
[ D/MR ( MW )] Key
Press this key momentarily to switch the frequency control among the VFO, Memory
System, and Home channel.
Press and hold in this key for one second to activate the Memory Storage mode.
DIAL Knob
This 24-position detented rotary switch is used for tuning, memory selection and most
function settings. The microphone [ UP ] / [ DWN ] buttons duplicate the functions of this
knob.
Display
The main digits on the display may show the operating frequency, memory name, or
any of many parameters during Menu setup.
CTCSS
(Continuous Tone Coded Squelch System)
Repeater Shift Direction
TX Indicator
Narrow Deviation
Low TX Power Selected
BUSY Indicator
FT-1900E O
P
C
ANEL
LOW2 (10 W)
CTCSS/DCS/EPCS Bell Paging
DCS (Digital Code Squelch)
S- and TX Power Meter
M
ONTROLS
LOW3 (25 W)
DTMF Memory Mode
Lock Feature Active
Home Channel
Frequency/Message Area
& S
WITCHES
HIGH (50 W)
Programmable Memory Scan
SKIP/Preferential Scan Channel
Priority Channel
Memory Mode
Memory Channel Number
VFO Mode
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents