Treadmill Setup - Life Fitness T5-0 User Manual

Set Up: Treadmill

Treadmill Setup

Treadmill Location
Place the treadmill where it will be used before beginning the setup process. In order to easily move the treadmill
before assembly, lift up on the rear of the treadmill base and push the treadmill forward on the front wheels.
Adjusting the Levelers
Your treadmill has a right and left leveler attached to the rear base of the treadmill,
which act as feet. After placing your treadmill in the desired location, adjust both
levelers so they touch the floor. To adjust the levelers, loosen the jam nut and turn the
leveler leg until the rocking motion or instability ceases and both levelers rest firmly on
the floor.
Note: It is extremely important that the levelers are correctly adjusted for proper
operation. An unbalanced unit may cause the belt to be misaligned.
Electrical Requirements
Most Life Fitness treadmills are intended for use on a normal 120 volt circuit in the United States and Canada.
Below is a table that provides the current rating for this product based on supply voltage. Make sure that the
treadmill model supports the proper line voltage for the installation location before plugging into the outlet.
Supply Voltage (VAC)
120
230
10
Frequency (Hz) Maximum Current (Amps)
50/60
50/60
12
6.3