Available Types, Ranges, Initial Values, And Midi Transmit Values (Set) - Korg SGPROX Owner's Manual

Controllers / MIDI
O P.Key Press allows aftertouch to be applied independently to an individual key. You can specify the key to be
transmitted, and assign it to a controller which will control its value. (The SGproX's keyboard does not support
polyphonic key pressure.)
Available types, ranges, initial values, and MIDI
transmit values (Set)
Some types of MIDI message are used in conjunction with other messages.
The SGproX provides frequently-used combinations of MIDI messages as sets.
FIX: fixed value S(L): initial setting for controller lower limit value S(H): initial setting for controller upper limit value SW: initial SW setting W/L: AW1,2/AL1-4
TYPE
Bank Select 00 to 16383
Prog Sel(0,000)
Prog Sel(0,127)
Prog Sel(000,0)
Prog Sel(127,0)
Data Entry 00 to 16383
RPC P.Bend Range
RPC Fine Tune –100 to +100
RPC Coarse Tune
Start/Stop/Clock
Explanation of MIDI transmission data (Set)
When you operate the selected controller, a value within the corresponding RANGE will be inserted in vv of
the MIDI column (Start/Stop/Clock are exceptions), and transmitted.
Bank Select
This set transmits the upper and lower bytes of Bank Sel together. This is used to select a bank number.
Program Select
Bank Select upper and lower bytes and the Program Change are transmitted together.
Sets with a Bank Select upper (MSB) value fixed at 00[ 00 ], and sets with the lower (LSB) value fixed at 00[ 00 ]
are provided. Select a set with the desired bank number, and you can control the program number in realtime.
Data Entry
This set transmits the upper and lower bytes of Data Entry together. This can also be used to enter data for undefined
RPC (RPN) messages.
RPN (Registered Parameter No.) are messages used to make common settings that extend beyond individual
manufacturers.
The SGproX provides the following three sets of frequently-used RPC (Registered Parameter Control) messages.
These allow you to control the corresponding function simply by selecting a function and assigning the value.
RPC Pitch Bend Range
This set transmits RPC Pitch Bend Range and the upper value of Data Entry.
This is used to specify the width of pitch bending. A value in the range of 0 to +127 can be specified. With a value
of +12, the pitch bend range will be +12 semitones (one octave).
RPC Fine Tune
This set transmits RPC Fine Tune and the upper and lower values of Data Entry.
The fine tune value is specified in units of one cent. A value in the range of –100 to +100 can be specified.
RPC Coarse Tune
This set transmits the RPC Coarse Tune and the upper value of Data Entry.
This is used to specify the coarse tuning (transposition). A value in the range of –64 to +64 can be specified. With
a value of +12, the coarse tuning will be +12 semitones.
60
VALUE
RANGE FIX S(L)
00 00
00 to 127 00 00
00 to 127 00 00
00 to 127 00 00
00 to 127 00 00
00 to 127 00 00
00 to 127 00 00
00 00 16383
00 to 127 02 00
00 –100
–64 to +63 00 –12
40 to 250 120 40
Use with a controller O: available
CONTROLLER
S(H) SW W/L AP
02 01 O
02 01 O
02 01 O
O
02 01
O
02 01
O
02 01
O
02 01
O O
8192
O O
12 12
+100 –52 O O
+12 +12 O O
250 240 O
AS MIDI ( n:Channel )
O [ Bn,00,vv,20,vv ]
O [ Bn,00,00,20,00,Cn,vv ] (Bank(MSB)=0)
O [ Bn,00,00,20,??,Cn,vv ] (
O
[ Bn,00,00,20,7F,Cn,vv ] (
O
[ Bn,00,01,20,00,Cn,vv ] (Bank(LSB)=0 )
O
[ Bn,00,??,20,00,Cn,vv ] (
O
[ Bn,00,7F,20,00,Cn,vv ] (
O
[ Bn,06,vv,26,vv ]
O
[ Bn,65,00,64,00,06,vv ]
O [ Bn,65,00,64,01,06,vv,26,vv ]
O [ Bn,65,00,64,02,06,vv ]
[ FA/FC/F8.... ]
Hexadecimal values are indicated by [
: unavailable
)
)
)
)
]