Korg SGPROX Owner's Manual page 24

Connecting other MIDI devices
In this way, you can control MIDI devices even in Program mode. However you
should use Performance mode if you wish to control two or more MIDI devices.
Features of Performance mode
• The SGproX provides eight timbres to control external MIDI devices.
• You can specify the MIDI channel for each timbre.
• MIDI channels can be selected from A1 to B16 or B1 to B16, for an actual total of 32 available channels.
• For each timbre you can enable/disable aftertouch and individual controllers.
• Two timbres are provided to control the internal tone generator.
• Assignable controller functions and settings can be specified independently for each performance.
Many other parameters can be specified for each timbre or Performance (
MIDI operation in Performance mode
From a MIDI device
24
Function (type) specified for
each assignable controller
AW1 [ Pitch Bend ]
AW2 92:Eff2 Depth
AL1 Prog Sel(00,001)
Internal tone
generator
AL2 Prog Sel(00,002)
timbres A/B
AL3 10:Panpot
AL4 [ FX Dyna Mod ]
Only when connected
AP 11:Expression
Only when connected
AS [ Sostenuto ]
Keyboard note data
Keyboard aftertouch
Damper (only if connected)
MIDI message transmitted
when each a ssignable
controller is operated
Pitch Bend
CC#92 : Eff2 Depth
Prog Sel(00,001)
Prog Sel(00,002)
CC#10 : Panpot
External control
timbres 1 to 8
CC#12 : FX Control 1
CC#11 : Expression
CC#66 : Sostenuto
Note On, Note Off
Channel After
CC#64 : Hold
p.38).
Internal control
MIDI IN
MIDI OUT
MIDI devices connected to
MIDI OUT A and B
(transmitted on the MIDI
channel specified for
each timbre)