Port Range Forward (Port Mapping) Setup; Connecting To The Camera From A Shared Local Pc - Samsung SNB-2000P User Manual

PORT RANGE FORWARD (PORT MAPPING) SETUP

If you have installed an Broadband Router with a camera connected, you must set the port
range forwarding on the Broadband Router so that a remote PC can access the camera in it.
Manual Port Range Forwarding
1. From the Setup menu of the Broadband
Router, select <Applications &
Gaming> - <Port Range Forward>.
For setting the port range forward for
a third-party Broadband Router, refer
to the user guide of that Broadband
Router.
2. Select <TCP> and <UDP Port>
for each connected camera to the
Broadband Router.
Each port number for the Broadband
Router should match that specifi ed in
<Basic> - <IP> from the camera's
Setup menu.
3. When done, click [Save Settings].
Your settings will be saved.
CONNECTING TO THE CAMERA FROM A SHARED LOCAL
PC
1. Launch <IP Installer>.
It will scan for connected cameras and
display a list of them.
2. Double-click a camera to access.
The Internet browser starts and
connects to the camera.

M
You can also access the camera by typing the IP address of the camera in the address bar of the
Internet browser.
English _35