White Bal - Samsung SNB-2000P User Manual

DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)
1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according to the
illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <ON>, the burst signal will
output.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
DAY NIGHT / NIGHT DAY : If set to
<AUTO>, you can specify the brightness
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot
light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.

WHITE BAL

If you need to adjust the screen brightness, use the WHITE BALANCE function.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)
1. Select <CAMERA SET> - <WHITE BAL>.
2. Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value
in DAY mode.
NIGHT : You can adjust the <WHITE BAL>
according to the ambient luminance.
AUTO AUTO
BURST
DAY DAY NIGHT NIGHT
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
NIGHT DAY NIGHT DAY
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
MASK AREA MASK AREA
MASK AREA MASK AREA
<SIZE>
<LOCATION> <LOCATION>
WHITE BAL WHITE BAL
DAY/NIGHT
MODE MODE
[ [ 00 00 ] ] ----
RED RED
[ [ 00 00 ] ] ----
BLUE BLUE
English _21
OFF
MID MID
2S 2S
MID MID
5S 5S
1 1 2 2
DAY
ATW2 ATW2
---- I I ---- ----
---- I I ---- ----