Samsung SNB-2000P User Manual page 12

overview
Rear Side
Item
Video Out Port
System, Power
Indicators
Reset Button
Power Port
Network Port
I/O Port
12_ overview
SYSTEM POWER
VIDEO
NETWORK
1 2 3 4 5
1,2 : ALARM IN 1,2 ACT
3 : GND
4,5 : ALARM OUT 1,2
Video signal output port connected to the monitor.
ON: The camera is turned on and connected to the network
properly.
SYSTEM Blinking: During DDNS setup, or in case of setup failure, or
in a state of unstable network connection
OFF: When the system is rebooting, or turned off
ON: While the power is on
POWER
OFF: If the power is off
Resets the camera settings to the default. Press and hold it for about 3
seconds to turn off the system indicator and restart the system.
Used to plug the power cable.
Used to connect to the Network cable.
ALARM IN
Used to connect the alarm input signal.
1,2
GND Used for earth-grounding.
ALARM OUT
Used to connect the alarm output signal.
1,2
RESET
LINK
AC 24V
DC 12V
GND
Description