Table of Contents
Advertisement
Qosmio F60 Series
Removing a memory media
The following instructions apply to all types of supported media devices.
To remove a memory media, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Taskbar.
2. Point to memory media and click the left Touch Pad control button.
3. Press the memory media to partially extend it out of the computer.
4. Grasp the media and remove it.
Press gently until the cover clicks into place.
Make sure the Bridge Media slot indicator is out before you remove
the memory media or turn off the computer's power. If you remove the
memory media or turn off the power while the computer is accessing
the memory media, you may lose data or damage the media.
Do not remove the memory media while the computer is in Sleep or
Hibernation Mode. The computer could become unstable or data in the
memory media could be lost.
Do not remove only the miniSD/microSD Card while leaving the
adaptor in the Bridge Media slot.
3-22
1
1. Bridge media slot
Figure 3-3 Removing memory media
2
2. Memory media
User's Manual
Advertisement
Table of Contents
