Inserting a memory media
The following instructions apply to all types of supported media devices. To
insert a memory media, follow the steps as detailed below:
1.
2.
3.
1. Memory media slot
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1.
2.
3.
4.
Downloaded from LpManual.com Manuals
User's Manual
Turn the memory media so that the contacts (metal areas) are face
down.
Insert the memory media into the memory media slot on the side of
the computer.
Press the memory media gently to ensure a firm connection is made.
Figure 3-13 Inserting a memory media (R830)
1
2
Make sure memory media is oriented properly before you insert it. If
you insert the media in wrong direction, you may not be able to
remove it.
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
Point to memory media and click the left Touch Pad control button.
Press the memory media to partially extend it out of the computer.
Grasp the media and remove it.
2. Memory media
R850/R840/R830
3-41