Instant Record; Timeshift - Triax HDS 110 Operating Manual

USB
PVR Configure Cont.
Record Device
1. Press the "LEFT" or "RIGHT" buttons to
select Record Device. This gives
information about the USB memory
device connected to the STB.
Format
This menu allows you to format the USB memory
device.
1. Press the "OK" button to select disk and File
System menu (Format Menu).
2. Press the "OK" button, an information banner
appears. Press the "OK" button to format the
USB memory device, please note all
information on the USB memory device will
be deleted.
3. Press the "EXIT" button to cancel.
Record

Instant record

While viewing a programme, pressing the
"RECORD" button will instantaneously start to
record the current channel.
*Note An instant recording must be manually
stopped by pressing the "Stop" button.
Pressing the "INFO" button displays recording
information.
Pressing the "STOP" button stops the recording,
then a confirmation window appears.
Press the "OK" button to stop the recording.
Press the "EXIT" button to continue recording.
Time Shift
Time Shift can be activated in viewing mode by
pressing the "PAUSE" button.
During "Time Shift", it is possible to perform the
following actions:
Press the "PLAY" button to start the playback
Press the "PAUSE" button to pause the playback
Press the ">>" button to fast forward the
playback
Press the "<<" button to rewind the playback
Press the "STOP" button to stop the Time Shift.
You are then brought back to live TV.
* Please note for Multimedia, Record, and Time
Shift functions a USB memory device must be
connected to the USB port on the rear panel of
the STB. The read/white speed must be high
enough to perform these operations reliably.
20