Channel List - Delete Antenna; Timer; Timer - Record Timer - Triax S-HD 207 Operating Manual

Channel list – Delete Antenna
This dialog allows you to delete all channels of the selected satellite from the channel list.
Therefore please enter menu channel list and select menu item Delete Antenna (OK).
Delete Antenna
Select the satellites to be erased with  and mark them with OK. For erasing their
channels from the channel list please press the red button on your remote control.
For leaving this menu please press EXIT. If the "Save?" popup appears, please select if you
want to store your modifications (Yes) or keep the previous settings (No). Confirm your choice
by pressing OK.

Timer

You can use the record timer functionality to programme a recording for a connected Hard
Disk or video recorder. Totally 30 record timers can be activated.
Or you can use the sleep timer to specify a time at which the
receiver is to switch into standby mode.
Therefore please enter the Main menu by pressing Menu; then
select menu item Timer and confirm with OK.
Timer – record timer
Use  to select line Record timer in menu Timer and press OK.
The following menu appears:
Record timer
Timer-index (1...30)
Start at
Stop time
Date of recording
Station
Repetitions
Activate
Programming a record timer:
Select line Timer index (1...30) with 
1.
There select timer place with ◄ ►
2.
Select lines Start at , Stop time or date of recording with using  and confirm with OK
3.
4. Enter the required time or date by pressing 0-9
5. Confirm your input with using OK
Select line Station with  and confirm with OK
6.
Select a channel with  or ◄ ► and confirm with OK .
7.
20:07
1 (inactive)
00:00 Uhr
00:00 Uhr
01.07.09
1 Das Erste
nothing
25
Timer
Timer
Record timer
Sleep timer