Installation Guide; Getting Started - Triax HDS 110 Operating Manual

Installation Guide

Getting Started

If you are using the Set Top Box (STB) for the first
time, the 'Installation Guide' menu appears. Press
the cursor button to setup the OSD Language
and Country settings. Highlight "Channel Search',
then press the "ok" button to enter "Dish Setup"
menu.
In "Dish Setup" menu, Astra 28.2° East is set
as the default satellite. If a different satellite is
required press the 'UP' or 'DOWN' button to
select the Satellite. Press "OK' button to select.
Select the 'RIGHT' button to enter the setup
menu. To scan the selected satellite press the
"BLUE" button.
This menu allows you to change settings like LNB
Type, SatCR_Number. SatCR_Frequency, LNB
Power, 22K Hz, Toneburst, DiSEqC 1.0, DiSEqC
1.1 and Motor. Press 'EXIT' button to exit the
setup menu.
On the "Dish Setup " menu the following options
are also available:
GREEN button:
RED button:
YELLOW button:
BLUE button:
Press the "GOTO' button to enter the
Transponder menu. Pressing "GOTO" again
takes you back to the "Dish Setup" menu.
GREEN button:
RED button:
YELLOW button:
BLUE button:
When the selected scan is complete, all active
channels found will be stored automatically.
To stop scanning at any time, press the EXIT
button. The channels already found will be
automatically stored.
9
Edit satellite
Add satellite
Delete satellite
Search Channels
Edit Transponder
Add Transponder
Delete Transponder
Search Transponder for
Channels