Pc Health Status - Gigabyte GA-990FXA-UD3 User Manual

2-8

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Hardware Thermal Control
Reset Case Open Status
Case Opened
Vcore
DDR3 1.5V
+3.3V
+12V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN1 Speed
Current SYSTEM FAN2 Speed
Current POWER FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN1 Fail Warning
SYSTEM FAN2 Fail Warning
POWER FAN Fail Warning
CPU Smart FAN Control
higf: Move
Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
CPU Smart FAN Mode
System Smart FAN Control
higf: Move
Enter: Select
F5: Previous Values
Hardware Thermal Control
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened ield will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this ield will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
BIOS Setup
PC Health Status
[Enabled]
[Disabled]
No
1.364V
1.536V
3.280V
12.048V
o
38 C
o
36 C
1962 RPM
0 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
PC Health Status
[Auto]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 52 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults