Table of Contents
Advertisement
64
Initial Setup and Menu
Performing the initial setup
Volume Control
1
2
Guide Preferences
1
2
v
3
8
Support Information
Read through the information, and press the OK button.
NOTE
Use the t / u (arrow) buttons to set up the Volume control to
select:
TV (this is the default)
v
External
v
The Volume + or – and MUTE buttons will control the
External equipment through the IR blaster.
Press the OK button.
Press the OK button on the IR Blaster Setup complete screen.
Support Information screen will appear.
Use the t / u (arrow) buttons to set up the Guide preferences
to select:
TV MediaGuide
v
External Device Guide
v
Press the q (arrow) button to select Interval Time.
0.125 sec
v
0.25 sec
v
0.375 sec
v
0.5 sec
v
0.625 sec
v
0.75 sec
v
0.875 sec
v
1 sec
v
After the interval time is selected, press the RED button to
show the Test screen. The test will start automatically.
Press the OK button.
Press the OK button on the IR Blaster Setup complete screen.
Support Information screen will appear.
The initial setup is completed.
v
Refer to this information if there is a problem and you need to contact
Customer Support. To find help, the following operation can be performed
at any time. SETUP button > Get Help > System Information > OK
button.
Advertisement
Table of Contents
