Scientific Atlanta FiberEdge User Manual page 83

> No color
Make sure the current TV program is broadcast in color.
•
Adjust the TV color controls.
•
> STB does not work
Verify that the STB is plugged into an electrical outlet that is not controlled by a wall switch, OR
•
if the electrical outlet is controlled by a wall switch, make sure the switch is in the ON position.
Verify that all cables are properly connected.
•
> Channel banner displays " ??? " instead of the channel number
Press the INFO button on the remote control. You may have pressed the Power button before all
•
of the data for the IPG was received by the STB.
> TV screen displays a message indicating that the STB is automatically updating its software
Wait for the time to display on the LED before continuing with your installation process.
•
Troubleshooting
82