Scientific Atlanta FiberEdge User Manual page 82

Troubleshooting
If your STB does not perform as expected, the following tips may help. If you need further
assistance, contact EATEL.
> No picture/No Sound
Verify that your TV, STB and other components are plugged into an electrical outlet that is not
•
controlled by a wall switch.
Verify that all cables are properly connected.
•
Verify that the power to your TV is turned on.
•
If your system includes a VCR and/or stereo, verify that you have properly connected them
•
to the STB.
Verify that your TV is tuned to the proper output channel (3 or 4).
•
Verify that the volume is turned up.
•
Verify that the Bypass feature is disabled.
•
> Distorted picture
Verify that all cables are properly connected.
•
Adjust the TV to channel 3 or 4.
•
Continued on Next Page
81