Table of Contents
Advertisement
Preparing STB 8300HD or 8300HDC to Work with Your
High-Definition TV
First, make sure that your DVR is properly connected to your HDTV television and other electronic
devices. Use the component (PrPbY) or HDMI
information, refer to pages 51-57 of this guide for connectivity diagrams.
Note: The composite ports (red, yellow, white) and the component ports (PrPbY) on the
back of the 8300HD are both active simultaneously.
Note: Refer to diagram instructions on page 49 to set up a DVR set-top box with a
Standard-Definition TV.
Selecting HDTV Picture Formats with the HDTV Setup Wizard
The following section provides instructions for using the HDTV Setup Wizard to select HDTV picture
formats using the Easy and Advanced Setup modes.
Start the HDTV Setup Wizard
To start the HDTV Setup Wizard:
1.
Make sure that the DVR is powered OFF, but still
plugged into an active power outlet, and connected
to the HDTV using the proper connectors (HDMI or
Component for an HDTV; Composite, RF, or S-Video
for a SDTV).
2.
Turn the TV ON.
3.
With the DVR powered OFF, press
and
at the same time. The HDTV
Setup Wizard screen appears.
4.
Press
to start the set up.
5.
Choose one of the following options:
>
To choose the Easy Setup option, press
then, go to the Easy Setup Instructions on page 93
of this guide.
mode limits your HDTV picture formats to 480i
and 1080i, depending on the TV type you select.
>
To choose the Advanced Setup option,
press
; then, go to the Advanced Setup
Instructions on page 93 of this guide.
save all the HDTV picture formats, so that you can toggle between them.
Digital Video Recording (DVR) Services
74
Choosing the Easy Setup
Note:
ports to connect the DVR to your HDTV. For more
™
;
Note:
Choosing the Advanced Setup mode allows you to
Hide quick links:
Advertisement
Table of Contents
