GE Monogram ZBD6605 Owner's Manual page 25

Questions?
PROBLEM
Use this
Water does not empty
out of Chef's Washer
problem
(flashing RINSE ONLY
solver
light) (on models
ZBD6905, ZBD7005 and
ZBD7105)
Chef's Washer continues
to drain indefinitely
Yellow color on dishes
and glassware
White film on glasses;
tea and coffee stains
Brown spots or pitting
of stainless steel;
tarnishing of silver
Light goes out
POSSIBLE CAUSE
Outlet blocked
Faulty fill valve
Water has iron or other
mineral content
Hard water
Repeated use of Sani
Consistently low water
level in Chef's Washer
Electrolysis following
contact with other metals
Detergent thrown over the • Load detergent properly. See Using the
cutlery or saucepans
WHAT TO DO
• Check garbage disposal and air gap
for blockage.
• Check outlet hose for kinks and sharp bends.
• First, turn off water supply valve, then turn
off circuit breaker and call for service.
• A special filter in the water supply line is
the only way to correct this problem.
Contact a water softener company.
• Try progressively increasing the Rinse Aid
setting to 6. See the Rinse Agent section.
• Discontinue use of Sani option.
• Check that operating water level is between
the MIN. and MAX. indicators on lower
spray arm support tower. See Care and
Cleaning section.
• Wash scratched or worn pieces by hand.
Polish silverware with a silver-plate cleaner.
Chef's Washer section.
• Call for service.
25