Pci Pnp - Fujitsu Siemens Computers D1711 Technical Manual

2.4.4 PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The
menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices.
Take caution when changing the settings of the PCIPnP menu items. Incorrect field
!
values can cause the system to malfunction.
Plug And Play O/S [Yes]
When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you
installed a Plug and Play operating system, the operating system configures the Plug and Play
devices not required for boot.
Configuration options: [Yes] [No]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device latency timer register.
Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set
to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested.
Configuration options: [No] [Yes]
A26361-D1711-Z120-1-7619, Edition 1
2 BIOS information
41