Fujitsu Siemens Computers D1711 Technical Manual page 28

1 Product introduction
K8V-MX Floppy Disk Drive Connector
2. Internal audio connectors (4-pin CD, AUX)
These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM,
TV tuner, or MPEG card.
K8V-MX Internal Audio Connector
3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE)
These connectors support the provided Ultra ATA133 IDE hard disk ribbon cable. Connect the
cable.s blue connector to the primary (recommended) or secondary IDE connector, then connect the
gray connector to the Ultra ATA133 slave device (hard disk drive) and the black connector to the
Ultra ATA133 master device. Connecting non-Ultra ATA133 devices to the secondary IDE connector
is recommended.
20 1
A26361-D1711-Z120-1-7619, Edition