MSI MS-6398 Technical Manual page 54

memory will be used to restore the PC to the previous
state when an "wake up" event occurs.
Run VGA BIOS If S3 Resume
This setting allows the system to initialize the VGA BIOS from S3 (Suspend to
RAM) sleep state and only works when the ACPI Standby State is set to S3/
STR. Setting options: Auto, Yes, No.
Power Management/APM
This item is used to select the degree (or type) of power saving and is related
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
Min Saving Minimum Power Management. Suspend Mode = 1 Hour.
Max Saving Maximum Power Management. Suspend Mode = 1 Min.
User Define Allows end users to configure each mode separately.
Modem Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system. Settings are
3, 4, 5, 7, 9, 10, 11 and NA.
Suspend Time Out
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings are Disabled, 1 Min, 2 Min, 4
Min, 8 Min, 12 Min, 20 Min, 30 Min, 40 Min and 1 Hour.
Power Button Function
This setting determines the function of the power button. When set to Power
Off, the power button works as normal power off button. When set to Suspend,
the computer will enter the suspend/sleep mode if you press the power button.
But if the button is pressed for more than four seconds, the computer is turned
off. Setting options: Power Off, Suspend.
Wake Up On PME, Wake Up On Ring, Wake Up On LAN, USB Wakeup From
S3
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
3-19
BIOS Setup