Dimm Module Combination; Installing Ddr Modules - MSI MS-6585 Technical Manual

MS-6585 ATX Mainboard

DIMM Module Combination

Install at least one DIMM module on the slots. Memory modules can be
installed on the slots in any order. You can install either single- or double-
sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot
DIMM 1
DIMM 2
DIMM 3
Maximum System Memory Supported 64MB~3GB
You can only install two PC2700/ DDR333 double side module.

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply inserted
in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
2-8
Memory Module Total Memory
S/D 64MB~1GB
S/D 64MB~1GB
S/D 64MB~1GB
S: Single Side
Notch
Volt
D: Double Side