Video Off Method; Doze Mode; Standby Mode - Abit IT5A User Manual

3-16
ä
Suspend or Suspend ( Susp,Stby -- > Off )
The video will only be switched off in Standby or Suspend mode.
ä
Suspend ( Suspend -- > Off )
The video will only be switched off in Suspend mode.

Video Off Method:

Three video off methods are available: "Blank", "V/H SYNC + Blank" and
"DPMS". The default is "V/H SYNC + Blank".
If this setting does not shut off the screen, select "Blank". If your monitor
and video card support DMPS standard, select "DPMS".
IDE HDD Power Down:
If the system has not accessed data on the hard disk drive during the
specified time period, the engine of the HDD will stop in order to save
electricity.
You can set 1 to 15 minutes or select Disable according to your use of the
HDD.

Doze Mode:

When the setting selected for "Power Management" is "User Define", you
can define for this mode any delay from 1 minute to 1 hour. If no power
management event occurs during this time period, meaning that computer is
inactive during this period, the system will enter the Doze power saving
mode.
If this mode is disabled, the system will enter the next mode in the sequence
(Standby or Suspend mode).

Standby Mode:

When the setting selected for "Power Management" is "User Define", you
can define for this mode any delay from 1 minute to 1 hour. If no power
management event occurs during this time period, meaning the computer is
inactive during this period, the system will enter the Standby power saving
mode.
If this mode is disabled, the system will enter the next mode in the sequence
(Suspend mode).
Chapter 3