Nokia C3-01 Service Manual page 18

37) Pull the SIDE-KEY PWB out with the tweezers. Do
NOT try to detach it from the ENGINE BOARD!
39) Place the SS-93 between the ENGINE BOARD and
the B-COVER as shown. Lever out the ENGINE BOARD
carefully, beginning from one side.
41) The ENGINE BOARD can now be removed.
18
38) Carefully disconnect the UI/READER MODULE
connector from the ENGINE BOARD with the SS-93. Be
careful not to damage any nearby components.
40) Lever out also the other side of the ENGINE
BOARD.
42) Push the SS-93 outwards as shown to detach the
two shown clips holding the ENGINE BOARD on the
UI/READER MODULE. Be careful not to damage any
nearby components. The UI/READER MODULE can
now be removed.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia C3-01/C3-01m
RM-640/RM-662
Service Manual Level 1&2
Version 1.0