Intel 695AS User Manual page 39

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
ACPI Function
Power Management
HDD Power Down
Doze Mode
Suspend Mode
PM Control by APM
Video Off Option
Video off Method
MODEM Use IRQ
Power Button Function
> Wake-Up Events
↑ ↓ → ← ↑ ↓ → ← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
↑ ↓ → ← ↑ ↓ → ←
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Power Management
This category allows you to select the type (or degree) of power saving which is directly
related to the following modes:
User Define(default) Allows you to set each mode individually. When not disabled, each
Min Saving
Max Saving
HDD Power Down
When enabled and after setting time of system inactivity, the hard disk drive will be powered
down while all the other devices remain active.
The settings are: 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min and Disabled.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be
shut off.
The settings are: l/2/4/8/12/20/30/40 Min, 1 Hour, and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend → off,
Power Management Setup
Enabled
User Define
Disabled
Disabled
Disabled
Yes
Suspend -> off
V/H SYNC+Blank
3
Instant-off
Press Enter
F6:Optimized Defaults F7:Standard Defaults
of the ranges is from 1 min. to 1hr. except for HDD Power Down
that ranges from 1 min. to 15 min. and disable.
Minimum power management. Doze Mode 1H, Suspend Mode=1 hr.,
Power Down=15 min.
Maximum power management. Doze Mode 1H, Suspend Mode=1
min., Power Down=1 min.
36
Item Help
Menu Level >
F1:General Help