Yamaha YFM660FS Grizzly 4x4 Supplementary Service Manual page 97

Parking
(1) L (Low), H (High), N (Neutral), and R (Reverse) positions
The end of the stopper lever is held by the return spring 1. Then, the stopper lever tab is sepa-
rated from the drive axle stopper to free the drive axle.
(2) P (Park) position
When the drive select lever is shifted to the "P" position, the cam lever of the shift cam pushes
up on the end of the stopper lever. Then, the stopper lever tab pushes against the drive axle
stopper to lock the drive axle.
(3) Not synchronized
If the stopper lever tab and the drive axle stopper are not synchronized, the torsion spring is
compressed. As a result, the spring pushes the stopper lever tab against the drive axle stopper
and waits until the synchronization is completed. When the stop lever tab and the drive axle are
synchronized, the stop lever tab pushes against the drive axle stopper in order to lock the drive
axle.
1 Stopper lever
2 Return spring
3 Shift cam
4 Drive axle
1
(1)
2
3
1
4
FEATURES
2
3
1
4
(2)
1 - 8
GEN
INFO
2
3
4
(3)