Chapter 1: Hardware Installation
Since USB .0 is backwards compatible with USB 1.1, the Verbatim Mobile
Hard Drive can be connected to all USB ports. When connected to a USB
1.1 port, however, the performance (data transfer rate) of the Verbatim
Mobile Hard Drive will be much lower than when the drive is connected
to a USB .0 port.
For optimum performance the Verbatim Mobile Hard Drive should
always be connected to a USB .0 interface.
Chapter : Driver Installation
Under XP / Vista / 7 and Mac OS X a separate Verbatim driver is not required. The
drivers will be installed automatically by the operating system after plugging in
the Verbatim Mobile Hard Drive into the USB port of the computer.
1. Connect the interface cable to the Verbatim
Mobile Hard Drive.
2. Connect the interface cable to the interface port of
your computer.
Hardware Installation
EN
1
7