Using Verbatim Turbo Usb 2.0 (Only Pc) - Verbatim Mobile Hard Drive User Manual

Verbatim Mobile Hard Drive
Chapter 4: Using Verbatim Turbo USB .0 (only PC)
EN
By installing the Turbo USB 2.0 driver for your Mobile Hard Drive, the data transfer
rate can be significantly increased (up to 40% faster transfer speed compared
4
to standard High-Speed USB).
Enabling the Turbo USB .0 driver
1. Connect the Verbatim Mobile Hard Drive to your PC.
2. Run "Start PC.exe" from your Mobile Hard Drive and go to "Software Installation"
-> "Turbo USB 2.0".
3. The Verbatim Turbo USB 2.0 Wizard will open.
4. Check the drive and click on "Configure" to enable the Turbo USB2.0 driver
for the Verbatim Mobile Hard Drive.
Disabling the Turbo USB .0 driver
1. Connect the Verbatim Mobile Hard Drive to your PC.
2. Run "Start PC.exe" from your Mobile Hard Drive and go to "Software Installation"
-> "Turbo USB 2.0".
3. The Verbatim Turbo USB 2.0 Wizard will open. Uncheck the drive and click
on "Configure" to disable the Verbatim Turbo USB 2.0 driver for the Verbatim
Mobile Hard Drive.
10