Grizzly G0605X1 Owner's Manual page 48

Cutting Rabbets with a Standard
Blade
Page 33
To cut rabbets with the standard blade:
1.
2.
3.
4.
5.
Figure 85,
Blade
Figure 85.
DO NOT place a tall board on edge to per-
form a rabbet cut with a standard blade.
Workpieces that are too tall to properly sup-
port with the fence can easily shift during
operation and cause kickback. Instead, place
the stock flat on the saw and perform the
rabbet cut with a dado blade, as instructed
on Page 45.
6.
7.
Figure 86
Blade
Figure 86.